PROJECT 05 / FREE 3D PRINT

Apex inflator
rugged case.

The S100 Apex came with a fabric bag. We took that personally. This custom two-color hard case gives the inflator and its hose fitted homes inside a proper latching box.

PETG HF4 PRINT PLATESCUSTOM-FIT SHELLS★★★★★ MAKERWORLD

FUNCTIONAL PRINT / CASE REMIX

THE IDEA

Great inflator.
Sad little bag.

The Fanttik S100 Apex is a genuinely useful tool. Its soft fabric bag is also technically a place to put it. We wanted real protection, positive latches, and an interior that keeps the inflator and connecting hose from rattling around like trunk junk.

Starting with Whity's excellent parametric Rugged Box, we sized the enclosure around the Costco S100 Apex and created fitted PETG shells for the base and lid. The finished case feels intentional, survives actual garage duty, and looks like it should have come with the inflator in the first place.

BUILD DATA

The numbers.

Fitment: Fanttik S100 Apex
Case size: ≈ 234 × 123 × 82 mm
Material: PETG HF / 569 g
Profile time: ≈ 11 hr 24 min
Nozzle: 0.4 mm
Layer height: 0.20 mm
Walls: 3
Infill: 15%

FIELD PHOTOS

Printed. Fitted. Protected.

Tap any photo to inspect the details.

FOUR-PLATE PRINT

No support circus.

PLATE 01

Bottom case

Color: Black
Supports: None
Brim: None

Print the rugged lower box exactly as arranged in the prepared profile.

PLATE 02

Lid + latches

Colors: Black / yellow
Supports: None
Brim: Latches only

An outside brim is already applied to the latches. The lid has an editable SVG logo and a prime tower configured to keep the two-color top surface clean.

PLATE 03

Base shell

Color: Yellow
Supports: None
Brim: None

The lower fitted shell cradles the inflator and keeps the hose organized beside it.

PLATE 04

Lid shell

Color: Yellow
Supports: None
Brim: None

The upper shell closes around the tool without loose foam, fabric, or improvised packing.

Bambu Studio previews of the four prepared print plates — Prepared for a Bambu Lab X1 Carbon using PETG HF. Assemble with M3 × 40 mm screws with 0.5 mm thread pitch.

FREE FILES / CC BY-NC-SA 4.0

Print your own.

The prepared 3MF contains the complete four-plate setup, including latches, colors, logo object, brim, and prime tower. The ZIP contains the four main case and fitted-shell STL files.

Download prepared 3MF Download STL files View the MakerWorld listing

REMIX CREDITS

Credit where it's due.

Custom-fit shells and print profile by Corey Wolfe / GlitchBox. Case design based on Rugged Box (Parametric) by Whity. Shared under the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 license.

Independent accessory—not sponsored, endorsed, or approved by Fanttik. Designed and test-fitted for the Costco Fanttik S100 Apex shown here; verify your exact model before printing.

Great inflator.Sad little bag.